APPENDIX AN
VENTING METHODS
This appendix is informative and is not part of the code. This appendix provides examples of various venting methods.
SECTION AN101
VENTING METHODS
For SI: 1 inch = 25.4 mm.
FIGURE AN101.1(1)
TYPICAL SINGLE-BATH WET-VENT ARRANGEMENTS
For SI: 1 inch = 25.4 mm.
FIGURE AN101.1(2)
TYPICAL DOUBLE-BATH WET-VENT ARRANGEMENTS
For SI: 1 inch = 25.4 mm.
FIGURE AN101.1(3)
TYPICAL HORIZONTAL WET VENTING
For SI: 1 inch = 25.4 mm.
FIGURE AN101.1(4)
TYPICAL METHODS OF WET VENTING
For SI: 1 inch = 25.4 mm.
FIGURE AN101.1(5)
SINGLE-STACK SYSTEM FOR A TWO-STORY DWELLING
For SI: 1 inch = 25.4 mm.
FIGURE AN101.1(6)
WASTE STACK VENTING
For SI: 1 inch = 25.4 mm.
FIGURE AN101.1(7)
CIRCUIT VENT WITH ADDITIONAL NONCIRCUIT-VENTED BRANCH