CHAPTER 35 REFERENCED STANDARDS

ADM—2020:

Aluminum Design Manual

1604.3.52002.1

ASM 35—00:

Aluminum Sheet Metal Work in Building Construction (Fourth Edition)

2002.1

711—20:

Specification for Self-Adhering Flashing Used for Installation of Exterior Wall Fenestration Products

1404.4

714—19:

Voluntary Specification for Liquid-Applied Flashing Used to Create a Water-Resistive Seal around Exterior Wall Openings in Buildings

1404.4

1402—09:

Standard Specifications for Aluminum Siding, Soffit and Fascia

1403.5.1

2502—19:

Comparative Analysis Procedure for Window and Door Products

1709.5

AAMA/WDMA/CSA 101/I.S.2/A440—17:

North American Fenestration Standard/Specification for Windows, Doors, and Skylights

1709.5.12405.5

117—10:

Specification for Tolerances for Concrete Construction and Materials

1901.7.1

216.1—14:

Code Requirements for Determining Fire Resistance of Concrete and Masonry Construction Assemblies

Table 721.1(2)722.1

318—19:

Building Code Requirements for Structural Concrete

722.2.4.31604.3.21616.2.11616.3.11704.5Table 1705.31705.3.21808.8.2Table 1808.8.21808.8.51808.8.61810.1.31810.2.4.11810.3.2.1.11810.3.2.1.21810.3.81810.3.9.4.2.11810.3.9.4.2.21810.3.10.11810.3.111810.3.11.11810.3.121810.3.131901.21901.31902.11903.11904.11904.21905.11905.1.11905.1.21905.1.31905.1.41905.1.51905.1.61905.1.71905.1.81908.12108.32206.1

550.5—18:

Code Requirements for the Design of Precast Concrete Diaphragms for Earthquake Motions

Table 1705.3

562-19:

Code Requirements for Assessment, Repair, and Rehabilitation of Existing Concrete Structures

101.4.7.1

ITG—7-09:

Specification for Tolerances for Precast Concrete

1901.7.2

ANSI/AISC 341—16:

Seismic Provisions for Structural Steel Buildings

1705.13.1.11705.13.1.21705.14.1.11705.14.1.21810.3.5.3.12205.2.1.12205.2.1.22205.2.22206.2.1

ANSI/AISC 358—16/s1—18:

Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications, Including Supplement No. 1

2205.2.1.12205.2.1.2

ANSI/AISC 360—16:

Specification for Structural Steel Buildings

722.5.2.2.11604.3.31705.2.12202.12203.12205.12205.2.1.12206.1

AISI S100—16(2020) w/S2—20:

North American Specification for the Design of Cold-Formed Steel Structural Members, 2016 Edition (Reaffirmed 2020), with Supplement 2, 2020 Edition

1604.3.31905.1.82202.12203.12210.12210.2

AISI S202—20:

Code of Standard Practice for Cold-formed Steel Framing, 2020

2211.1.3.1

AISI S220—20:

North American Standard for Cold-Formed Steel Nonstructural Framing

2202.12203.12211.2Table 2506.2Table 2507.2

AISI S230—2019:

Standard for Cold-formed Steel Framing—Prescriptive Method for One- and Two-family Dwellings, 2019

1609.1.11609.1.1.12211.1.2

AISI S240—20:

North American Standard for Cold-Formed Steel Structural Framing, 2020

2202.12203.12211.12211.1.1.12211.1.3.3Table 2506.2Table 2507.2Table 2603.12.1Table 2603.12.2

AISI S400—20:

North American Standard for Seismic Design of Cold-formed Steel Structural Systems, 2020

2210.22211.1.1.12211.1.1.2

ALI ALCTV—2017:

Standard for Automotive Lifts—Safety Requirements for Construction, Testing and Validation (ANSI)

Table 3001.3

540—13:

Test Method for Louvers Impacted by Wind Borne Debris

1609.2.1

A13.1—2020:

Scheme for the Identification of Piping Systems

415.11.7.5

A108.1A—17:

Installation of Ceramic Tile in the Wet-set Method, with Portland Cement Mortar

2103.2.3

A108.1B—17:

Installation of Ceramic Tile on a Cured Portland Cement Mortar Setting Bed with Dry-set or Latex-Portland Cement Mortar

2103.2.3

A108.4—09:

Installation of Ceramic Tile with Organic Adhesives or Water-cleanable Tile-setting Epoxy Adhesive

2103.2.3.6

A108.5—20:

Installation of Ceramic Tile with Dry-set Portland Cement Mortar or Latex-Portland Cement Mortar

2103.2.3.12103.2.3.2

A108.6—99 (Reaffirmed 2019):

Installation of Ceramic Tile with Chemical Resistant, Water Cleanable Tile-Setting and -Grouting Epoxy

2103.2.3.3

A108.8—99 (Reaffirmed 2019):

Installation of Ceramic Tile with Chemical-Resistant Furan Resin Mortar and Grout

2103.2.3.4

A108.9—99 (Reaffirmed 2019):

Installation of Ceramic Tile with Modified Epoxy Emulsion Mortar/Grout

2103.2.3.5

A108.10—17:

Installation of Grout in Tilework

2103.2.3.7

A118.1—18:

American National Standard Specifications for Dry-Set Cement Mortar

2103.2.3.1

A118.3—13:

American National Standard Specifications for Chemical-resistant, Water-cleanable Tile-setting and -grouting Epoxy and Water Cleanable Tile-setting Epoxy Adhesive

2103.2.3.3

A118.4—18:

American National Standard Specifications for Modified Dry-set Cement Mortar

2103.2.3.22103.2.4

A118.5—99:

American National Standard Specifications for Chemical Resistant Furan Mortars and Grouts for Tile Installation

2103.2.3.4

A118.6—19:

American National Standard Specifications for Standard Cement Grouts for Tile Installation

2103.2.3.7

A118.8—99:

American National Standard Specifications for Modified Epoxy Emulsion Mortar/Grout

2103.2.3.5

A136.1—20:

American National Standard Specifications for Organic Adhesives for Installation of Ceramic Tile

2103.2.3.6

A137.1—19:

American National Standard Specifications for Ceramic Tile

202

A137.3—17:

American National Standard Specification for Gauged Porcelain Tile and Gauged Porcelain Tile Panels/Slabs

202

Z 97.1—14:

Safety Glazing Materials Used in Buildings—Safety Performance Specifications and Methods of Test

2406.1.22406.2Table 2406.2(2)2406.3.12407.12407.1.42408.2.12408.32409.22409.32409.4.1

ANSI 117—2020:

Standard Specification for Structural Glued Laminated Timber of Softwood Species

2306.1

ANSI/APA A190.1—2017:

Structural Glued Laminated Timber

2303.1.32306.1

ANSI/APA PRG 320—2019:

Standard for Performance-rated Cross-laminated Timber

602.42303.1.4

ANSI/APA PRP 210—2019:

Standard for Performance-Rated Engineered Wood Siding

2303.1.52304.72306.3Table 2306.3(1)

ANSI/APA PRR 410—16:

Standard for Performance-Rated Engineered Wood Rim Boards

2303.1.13

APA PDS Supplement 1—12:

Design and Fabrication of Plywood Curved Panels (revised 2013)

2306.1

APA PDS Supplement 2—12:

Design and Fabrication of Plywood-lumber Beams (revised 2013)

2306.1

APA PDS Supplement 3—12:

Design and Fabrication of Plywood Stressed-skin Panels (revised 2013)

2306.1

APA PDS Supplement 4—12:

Design and Fabrication of Plywood Sandwich Panels (revised 2013)

2306.1

APA PDS Supplement 5—16:

Design and Fabrication of All-plywood Beams (revised 2013)

2306.1

APA PDS—20:

Panel Design Specification

2306.1

APA R540—19:

Builder Tips: Proper Storage and Handling of Glulam Beams

2306.1

APA S475—20:

Glued Laminated Beam Design Tables

2306.1

APA S560—20:

Field Notching and Drilling of Glued Laminated Timber Beams

2306.1

APA T300—16:

Glulam Connection Details

2306.1

APA X440—17:

Product Guide: Glulam

2306.1

APA X450—18:

Glulam in Residential Construction—Building—Construction Guide

2306.1

EP 484.3 DEC2017:

Diaphragm Design of Metal-clad, Wood-frame Rectangular Buildings

2306.1

EP 486.3 SEP2017:

Shallow-post and Pier Foundation Design

2306.1

EP 559.1 AUG2010(R2019):

Design Requirements and Bending Properties for Mechanically Laminated Wood Assemblies

2306.1

7—16 with Supplement 1:

Minimum Design Loads and Associated Criteria for Buildings and Other Structures

202Table 1504.21602.1Table 1604.31604.5Table 1604.51604.8.21604.91605.11605.1.11605.2 1606.31607.9.11607.9.1.11607.9.1.21607.10 1607.14.11607.171608.11608.2Figure 1608.2(1)1608.31609.1.11609.21609.3Figure 1609.3(5)Figure 1609.3(6)Figure 1609.3(7)Figure 1609.3(8)Figure 1609.3(9)Figure 1609.3(10)Figure 1609.3(11)Figure 1609.3(12)1609.5.11609.5.31611.11611.21612.21613.11613.2.21613.2.3Table 1613.2.3(1)Table 1613.2.3(2)1613.2.51613.2.5.11613.2.5.21613.31614.11615.11705.13 1705.13.1.11705.13.1.21705.13.41705.14.1.11705.14.1.21705.14.21705.14.31705.14.41709.51709.5.3.11802.11803.5.121806.11808.31808.3.11809.131810.3.1.11810.3.6.11810.3.81810.3.9.21810.3.9.41810.3.9.4.11810.3.9.4.21810.3.11.21810.3.121902.11905.1.21905.1.71905.1.82205.2.1.12205.2.1.22205.2.22206.2.12209.12209.22210.22211.1.1.1Table 2304.6.1Table 2306.3(3)Table 2308.7.52404.12505.12505.22506.2.1

8—02:

Standard Specification for the Design of Cold-formed Stainless Steel Structural Members

1604.3.32210.12210.2

19—16:

Structural Applications of Steel Cables for Buildings

2208.1

24—14:

Flood Resistant Design and Construction

1202.4.21202.4.41612.21612.42702.1.83001.3

29—05:

Standard Calculation Methods for Structural Fire Protection

722.1

32—01:

Design and Construction of Frost Protected Shallow Foundations

1809.5

49—12:

Wind Tunnel Testing for Buildings and Other Structures

1609.1.1

55—16:

Tensile Membrane Structures

3102.2

170—2017:

Ventilation of Health Care Facilities

1020.6

A17.1—2019/CSA B44—19:

Safety Code for Elevators and Escalators

907.3.3911.1.61009.4.11607.11.13001.2Table 3001.33001.43001.53002.53003.23007.13008.1.43008.7.1

A17.7—2007/CSA B44—07(R2017):

Performance-based Safety Code for Elevators and Escalators

Table 3001.33001.53002.5

A18.1—2020:

Safety Standard for Platform Lifts and Stairway Chairlifts

1110.9Table 3001.3

A90.1—2015:

Safety Standard for Belt Manlifts

Table 3001.3

B16.18—2018:

Cast Copper Alloy Solder Joint Pressure Fittings

909.13.1

B16.22—2018:

Wrought Copper and Copper Alloy Solder Joint Pressure Fittings

909.13.1

B20.1—2018:

Safety Standard for Conveyors and Related Equipment

Table 3001.33004.3

B31.3—2020:

Process Piping

415.11.7

ANSI/ASSE Z359.1—2020:

The Fall Protection Code

1015.61015.7

A6/A6M—2017A:

Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes and Sheet Piling

1810.3.2.31810.3.5.3.11810.3.5.3.3

A36/A36M—14:

Specification for Carbon Structural Steel

1810.3.2.3

A153/A153M—2016A:

Specification for Zinc Coating (Hot-dip) on Iron and Steel Hardware

2304.10.6

A240/A240M—17:

Standard Specification for Chromium and Chromium-nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels and for General Applications

Table 1507.4.3(1)

A252—2010(2018):

Specification for Welded and Seamless Steel Pipe Piles

1810.3.2.3

A283/A283M—2018:

Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

1810.3.2.3

A416/A416M—2017A:

Specification for Steel Strand, Uncoated Seven-wire for Prestressed Concrete

1810.3.2.2

A463/A463M—15:

Standard Specification for Steel Sheet, Aluminum-coated, by the Hot-dip Process

Table 1507.4.3(2)

A572/A572M—2018:

Specification for High-strength Low-alloy Columbium-Vanadium Structural Steel

1810.3.2.3

A588/A588M—15:

Specification for High-strength Low-alloy Structural Steel with 50 ksi (345 MPa) Minimum Yield Point with Atmospheric Corrosion Resistance

1810.3.2.3

A615/A615M—15ae1:

Specification for Deformed and Plain Carbon-steel Bars for Concrete Reinforcement

1704.51810.3.10.2

A653/A653M—2017:

Specification for Steel Sheet, Zinc-coated Galvanized or Zinc-iron Alloy-coated Galvannealed by the Hot-dip Process

Table 1507.4.3(1)Table 1507.4.3(2)2304.10.6.1

A690/A690M—13a(2018):

Standard Specification for High-strength Low-alloy Nickel, Copper, Phosphorus Steel H-piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments

1810.3.2.3

A706/A706M—2016:

Specification for Low-alloy Steel Deformed and Plain Bars for Concrete Reinforcement

1704.5Table 1705.32107.32108.3

A722/A722M—2018:

Specification for High-strength Steel Bars for Prestressed Concrete

1810.3.10.2

A755/A755M—2016E1:

Specification for Steel Sheet, Metallic-coated by the Hot-dip Process and Prepainted by the Coil-coating Process for Exterior Exposed Building Products

Table 1507.4.3(1)Table 1507.4.3(2)

A792/A792M—10(2015):

Specification for Steel Sheet, 55% Aluminum-zinc Alloy-coated by the Hot-dip Process

Table 1507.4.3(1)Table 1507.4.3(2)

A875/A875M—13:

Standard Specification for Steel Sheet, Zinc-5%, Aluminum Alloy-coated by the Hot-dip Process

Table 1507.4.3(2)

A924/A924M—2017A:

Standard Specification for General Requirements for Steel Sheet, Metallic-coated by the Hot-dip Process

Table 1507.4.3(1)

B42—2015A:

Specification for Seamless Copper Pipe, Standard Sizes

909.13.1

B43—15:

Specification for Seamless Red Brass Pipe, Standard Sizes

909.13.1

B68/B68M—11:

Specification for Seamless Copper Tube, Bright Annealed (Metric)

909.13.1

B88—2016:

Specification for Seamless Copper Water Tube

909.13.1

B101—12:

Specification for Lead-coated Copper Sheet and Strip for Building Construction

1403.5.3Table 1507.2.8.2Table 1507.4.3(1)

B209—14:

Specification for Aluminum and Aluminum Alloy Steel and Plate

Table 1507.4.3(1)

B251/B251M—2017:

Specification for General Requirements for Wrought Seamless Copper and Copper-alloy Tube

909.13.1

B280—2018:

Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service

909.13.1

B370—12:

Specification for Copper Sheet and Strip for Building Construction

1403.5.2Table 1507.2.8.2Table 1507.4.3(1)

B695—2004(2016):

Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel Strip for Building Construction

2304.10.6.12304.10.6.3

C5—2018:

Specification for Quicklime for Structural Purposes

2109.2.4.8.7Table 2507.2

C22/C22M—2015:

Specification for Gypsum

Table 2506.2

C27—1998(2018):

Specification for Standard Classification of Fireclay and High-alumina Refractory Brick

2111.6

C28/C28M—10(2015):

Specification for Gypsum Plasters

Table 2507.2

C31/C31M—2018B:

Practice for Making and Curing Concrete Test Specimens in the Field

Table 1705.3

C33/C33M—2018:

Specification for Concrete Aggregates

722.3.1.4722.4.1.1.3

C35/C35—01(2014):

Specification for Inorganic Aggregates for Use in Gypsum Plaster

Table 2507.2

C55—2017:

Specification for Concrete Building Brick

Table 722.3.2

C59/C59M—00(2015):

Specification for Gypsum Casting Plaster and Molding Plaster

Table 2507.2

C61/C61M—00(2015):

Specification for Gypsum Keene’s Cement

Table 2507.2

C62—2017:

Standard Specification for Building Brick (Solid Masonry Units Made from Clay or Shale)

1807.1.6.3

C67/C67M—2018:

Test Methods of Sampling and Testing Brick and Structural Clay Tile

722.4.1.1.12109.2.1.1

C73—2017:

Specification for Calcium Silicate Brick (Sand-lime Brick)

Table 722.3.2

C90—2016A:

Specification for Loadbearing Concrete Masonry Units

Table 722.3.21807.1.6.32114.3

C91/C91M—2018:

Specification for Masonry Cement

Table 2507.2

C94/C94M—2017A:

Specification for Ready-mixed Concrete

110.3.1

C140/C140M—2018:

Test Method Sampling and Testing Concrete Masonry Units and Related Units

722.3.1.2

C141/C141M —14:

Standard Specification for Hydrated Hydraulic Lime for Structural Purposes

2109.2.4.8.7

C150/C150M—2018:

Specification for Portland Cement

Table 2507.2

C172/C172M—2017:

Practice for Sampling Freshly Mixed Concrete

Table 1705.3

C199—1984(2016):

Test Method for Pier Test for Refractory Mortars

2111.62111.92113.12

C206—14:

Specification for Finishing Hydrated Lime

2109.2.4.8.7Table 2507.2

C208—2012(2017)E1:

Specification for Cellulosic Fiber Insulating Board

Table 1508.22303.1.6

C216—2017A:

Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)

Table 721.1(2)1807.1.6.3

C270—14a:

Specification for Mortar for Unit Masonry

2103.2.4

C315—2007(2016):

Specification for Clay Flue Liners and Chimney Pots

2111.92113.11.1Table 2113.16(1)

C317/C317M—2000(2015):

Specification for Gypsum Concrete

2514.1

C330/C330M—2017A:

Specification for Lightweight Aggregates for Structural Concrete

202

C331/C331M—2017:

Specification for Lightweight Aggregates for Concrete Masonry Units

722.3.1.4722.4.1.1.3

C406/C406M—15:

Specification for Roofing Slate

1507.7.5

C472—99(2014):

Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete

Table 2506.2

C473—2017:

Test Methods for Physical Testing of Gypsum Panel Products

Table 2506.2

C474—15:

Test Methods for Joint Treatment Materials for Gypsum Board Construction

Table 2506.2

C475/C475M—2017:

Specification for Joint Compound and Joint Tape for Finishing Gypsum Board

Table 2506.2

C514—04(2014):

Specification for Nails for the Application of Gypsum Board

Table 721.1(2)Table 721.1(3)Table 2506.2

C516—2008(2014)E1:

Specifications for Vermiculite Loose Fill Thermal Insulation

722.3.1.4722.4.1.1.3

C547—2017:

Specification for Mineral Fiber Pipe Insulation

Table 721.1(2)Table 721.1(3)

C549—06(2012):

Specification for Perlite Loose Fill Insulation

722.3.1.4722.4.1.1.3

C552—2017E1:

Standard Specification for Cellular Glass Thermal Insulation

Table 1508.2

C557—2003(2017):

Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing

Table 2506.22508.4

C578—2018:

Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation

Table 1508.22603.10Table 2603.12.1Table 2603.12.2Table 2603.13.1Table 2603.13.2

C587—2004(2018):

Specification for Gypsum Veneer Plaster

Table 2507.2

C595/C595M—2018:

Specification for Blended Hydraulic Cements

Table 2507.2

C631—09(2014):

Specification for Bonding Compounds for Interior Gypsum Plastering

Table 2507.2

C635/C635M—2017:

Specification for the Manufacture, Performance and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings

2506.2.1

C636/C636M—13:

Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels

808.1.1.1

C652—2017A:

Specification for Hollow Brick (Hollow Masonry Units Made from Clay or Shale)

1807.1.6.3

C726—2017:

Standard Specification for Mineral Wool Roof Insulation Board

Table 1508.2

C728—2017A:

Standard Specification for Perlite Thermal Insulation Board

Table 1508.2

C744—2016:

Specification for Prefaced Concrete and Calcium Silicate Masonry Units

Table 722.3.2

C754—2018:

Specification for Installation of Steel Framing Members to Receive Screw-attached Gypsum Panel Products

Table 2508.1Table 2511.1.1

C836/C836M—2018:

Specification for High-solids Content, Cold Liquid-applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course

1507.14.2

C840—2018A:

Specification for Application and Finishing of Gypsum Board

Table 2508.12509.2

C841—2003(2018):

Specification for Installation of Interior Lathing and Furring

Table 2508.1Table 2511.1.1

C842—05(2015):

Specification for Application of Interior Gypsum Plaster

Table 2511.1.12511.32511.4

C843—2017:

Specification for Application of Gypsum Veneer Plaster

Table 2511.1.1

C844—2015:

Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster

Table 2508.1

C847—2018:

Specification for Metal Lath

Table 2507.2

C887—13:

Specification for Packaged, Dry Combined Materials for Surface Bonding Mortar

1805.2.22103.2.2

C897—15:

Specification for Aggregate for Job-mixed Portland Cement-based Plasters

Table 2507.2

C920—2018:

Standard for Specification for Elastomeric Joint Sealants

703.7Table 2506.2

C926—2018B:

Specification for Application of Portland Cement-based Plaster

2109.2.4.8.62109.2.4.8.82510.3Table 2511.1.12511.32511.42512.12512.1.22512.22512.62512.8.22512.92513.7

C932—06(2013):

Specification for Surface-applied Bonding Compounds for Exterior Plastering

Table 2507.2

C933—2018:

Specification for Welded Wire Lath

Table 2507.2

C946—2018:

Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls

2103.2.22114.5

C954—2018:

Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 inch (0.84 mm) to 0.112 inch (2.84 mm) in Thickness

Table 2506.2Table 2507.2

C956—04(2015):

Specification for Installation of Cast-in-place Reinforced Gypsum Concrete

2514.1

C957/C957M—2017:

Specification for High-solids Content, Cold Liquid-applied Elastomeric Waterproofing Membrane with Integral Wearing Surface

1507.14.2

C1002—2018:

Specification for Steel Self-piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

722.7.2.2Table 2506.2Table 2507.2

C1007—11a(2015):

Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories

Table 2508.1Table 2511.1.1

C1029—15:

Specification for Spray-applied Rigid Cellular Polyurethane Thermal Insulation

1507.13.2

C1032—2018:

Specification for Woven Wire Plaster Base

Table 2507.2

C1047—2014a:

Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base

Table 2506.2Table 2507.2

C1063—2018B:

Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-based Plaster

2109.2.4.8.52510.3Table 2511.1.12512.1.1

C1088—2018:

Specification for Thin Veneer Brick Units Made from Clay or Shale

Table 721.1(2)

C1157/C1157M—2017:

Standard Performance Specification for Hydraulic Cement

Table 2507.2

C1167—2011(2017):

Specification for Clay Roof Tiles

1507.3.4

C1177/C1177M—2017:

Specification for Glass Mat Gypsum Substrate for Use as Sheathing

Table 1508.2Table 2506.2

C1178/C1178M—2018:

Specification for Glass Mat Water-resistant Gypsum Backing Panel

Table 2506.2Table 2509.2

C1186—2008(2016):

Specification for Flat Fiber Cement Sheets

1403.101404.16.11404.16.2

C1261—2013(2017)E1:

Specification for Firebox Brick for Residential Fireplaces

2111.62111.9

C1278/C1278M—2017:

Specification for Fiber-reinforced Gypsum Panels

Table 1508.2Table 2506.2

C1280—13a:

Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing

Table 2508.12508.2

C1283—2015:

Practice for Installing Clay Flue Lining

2113.9.12113.12

C1288—2017:

Standard Specification for Discrete Nonasbestos Fiber-cement Interior Substrate Sheets

Table 2509.2

C1289—2018:

Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board

Table 1508.22603.10Table 2603.12.1Table 2603.12.2

C1313/C1313M—13:

Standard Specification for Sheet Radiant Barriers for Building Construction Applications

1510.4

C1325—2018:

Standard Specification for Fiber-mat Reinforced Cementitious Backer Units

Table 2509.2

C1328/C1328M—12:

Specification for Plastic (Stucco Cement)

Table 2507.2

C1364—2017:

Standard Specification for Architectural Cast Stone

2103.1

C1372—17:

Standard Specification for Dry-Cast Segmental Retaining Wall Units

1807.2.4

C1396/C1396M—2017:

Specification for Gypsum Board

Figure 722.5.1(2)Figure 722.5.1(3)Table 2506.2

C1492—2003(2016):

Standard Specification for Concrete Roof Tile

1507.3.5

C1568—08(2013):

Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)

1504.3.1.1

C1569—03(2016):

Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)

1504.3.1.2

C1570—03(2016):

Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Air Permeability Method)

1504.3.1.3

C1600/C1600M—2017:

Standard Specification for Rapid Hardening Hydraulic Cement

Table 2507.2

C1629/C1629M—2018A:

Standard Classification for Abuse-resistant Nondecorated Interior Gypsum Panel Products and Fiber-reinforced Cement Panels

403.2.2.1403.2.2.2403.2.2.4

C1658/C1658M—2018:

Standard Specification for Glass Mat Gypsum Panels

Table 2506.2

C1670/C1670M—2018:

Standard Specification for Adhered Manufactured Stone Masonry Veneer Units

2103.1

C1707—18:

Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes

2109.2.4.8.7

C1766—2015:

Standard Specification for Factory-laminated Gypsum Panel Products

Table 2506.2

C1788—14:

Standard Specification for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications

2109.2.4.8.5

D25—2012(2017):

Specification for Round Timber Piles

1810.3.2.42303.1.12

D41/D41M—2011(2016):

Specification for Asphalt Primer Used in Roofing, Dampproofing and Waterproofing

Table 1507.10.2

D43/D43M—2000(2018):

Specification for Coal Tar Primer Used in Roofing, Dampproofing and Waterproofing

Table 1507.10.2

D56—2016A:

Test Method for Flash Point by Tag Closed Cup Tester

202

D86—2017:

Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure

202

D92—2018:

Test Method for Flash and Fire Points by Cleveland Open Cup Tester

202

D93—2018:

Test Methods for Flash Point by Pensky-Martens Closed Cup Tester

202

D226/D226M—2017:

Specification for Asphalt-saturated Organic Felt Used in Roofing and Waterproofing

1403.21505.21507.1.1Table 1507.1.1(1)1507.3.3Table 1507.81507.9.5Table 1507.10.21507.17.31507.17.4.1

D227/D227M—2003(2018):

Specification for Coal-tar-saturated Organic Felt Used in Roofing and Waterproofing

Table 1507.10.2

D312/D312M—2016M:

Specification for Asphalt Used in Roofing

Table 1507.10.2

D422—63(2007)e2:

Test Method for Particle-size Analysis of Soils

1803.5.3

D448—2012(2017):

Standard Classification for Sizes of Aggregate for Road and Bridge Construction

1507.12.3

D450/D450M—2017(2018):

Specification for Coal-tar Pitch Used in Roofing, Dampproofing and Waterproofing

Table 1507.10.2

D635—14:

Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

2606.4

D1143/D1143M—2007(2013)E1:

Test Methods for Deep Foundations Under Static Axial Compressive Load

1810.3.3.1.2

D1227—13:

Specification for Emulsified Asphalt Used as a Protective Coating for Roofing

Table 1507.10.2

D1557—12e1:

Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort [56,000 ft-lb/ft³ (2,700 kN m/m³)]

1705.61804.6

D1863/D1863M—2005(2018):

Specification for Mineral Aggregate Used on Built-up Roofs

Table 1504.9Table 1507.10.2

D1929—16:

Standard Test Method for Determining Ignition Temperature of Plastics

402.6.4.4406.7.22606.4

D1970/D1970M—2017A:

Specification for Self-adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roof Underlayment for Ice Dam Protection

1507.1.11507.3.91507.5.71507.8.81507.9.91507.11.2.11507.17.4.1

D2178/D2178M—15A:

Specification for Asphalt Glass Felt Used in Roofing and Waterproofing

Table 1507.10.2

D2487—2017:

Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)

Table 1610.11803.5.1

D2626/D2626M—04(2012)e1:

Specification for Asphalt Saturated and Coated Organic Felt Base Sheet Used in Roofing

Table 1507.1.1(1)1507.3.3Table 1507.10.2

D2822/D2822M—2005(2011):

Specification for Asphalt Roof Cement, Asbestos Containing

Table 1507.10.2

D2823/D2823M—05(2011)e1:

Specification for Asphalt Roof Coatings, Asbestos Containing

Table 1507.10.2

D2824/D2824M—2018:

Standard Specification for Aluminum-pigmented Asphalt Roof Coatings, Nonfibered and Fibered without Asbestos

Table 1507.10.2

D2843—16:

Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics

2606.4

D2859—2016:

Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials

804.4.1804.4.2

D2898—2010(2017):

Test Methods for Accelerated Weathering of Fire-retardant-treated Wood for Fire Testing

1505.12303.2.42303.2.6

D3019/D3019M—2017:

Specification for Lap Cement Used with Asphalt Roll Roofing, Nonfibered, Asbestos Fibered and Nonasbestos Fibered

Table 1507.10.2

D3161/D3161M—2016A:

Test Method for Wind Resistance of Steep Slope Roofing Products (Fan Induced Method)

1504.2 Table 1504.21504.4.3

D3200—1974(2017):

Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles

2303.1.12

D3201/D3201M—13:

Test Method for Hygroscopic Properties of Fire-retardant Wood and Wood-base Products

2303.2.7

D3278—96(2011):

Test Methods for Flash Point of Liquids by Small Scale Closed-cup Apparatus

202

D3462/D3462M—2016:

Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules

1507.2.4

D3468/D3468M—99(2013)e1:

Specification for Liquid-applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing

1507.14.2

D3498—03(2011):

Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems

703.7

D3679—2017:

Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding

1403.91404.14

D3689/D3698M—07(2013)e1:

Test Methods for Deep Foundations under Static Axial Tensile Load

1810.3.3.1.5

D3737—2018E1:

Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)

2303.1.3

D3746/D3746M—1985(2015)E1:

Test Method for Impact Resistance of Bituminous Roofing Systems

1504.8

D3747—79(2007):

Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation

Table 1507.10.2

D3909/D3909M—14:

Specification for Asphalt Roll Roofing (Glass Felt) Surfaced with Mineral Granules

1507.2.8.21507.6.5Table 1507.10.2

D3957—2009(2015):

Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings

2303.1.11

D4022/D4022M—07(2012)e1:

Specification for Coal Tar Roof Cement, Asbestos Containing

Table 1507.10.2

D4272—15:

Test Method for Total Energy Impact of Plastic Films by Dart Drop

1504.8

D4318—2017E1:

Test Methods for Liquid Limit, Plastic Limit and Plasticity Index of Soils

1803.5.3

D4434/D4434M—2015:

Specification for Poly (Vinyl Chloride) Sheet Roofing

Table 1507.12.2

D4479/D4479M—2007(2018):

Specification for Asphalt Roof Coatings—Asbestos-free

Table 1507.10.2

D4586/D4586M—2007(2018):

Specification for Asphalt Roof Cement—Asbestos-free

Table 1507.10.2

D4601/D4601M—04(2012)e1:

Specification for Asphalt-coated Glass Fiber Base Sheet Used in Roofing

Table 1507.10.21507.11.2.1

D4637/D4637M—2015:

Specification for EPDM Sheet Used in Single-ply Roof Membrane

Table 1507.12.2

D4829—11:

Test Method for Expansion Index of Soils

1803.5.3

D4869/D4869M—2016A:

Specification for Asphalt-saturated (Organic Felt) Underlayment Used in Steep Slope Roofing

1507.1.1Table 1507.1.1(1)1507.17.31507.17.4.1

D4897/D4897M—2016:

Specification for Asphalt-coated Glass Fiber Venting Base Sheet Used in Roofing

Table 1507.10.2

D4945—2017:

Test Method for High-strain Dynamic Testing of Deep Foundations

1705.101810.3.3.1.2

D4990—97a(2013):

Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing

Table 1507.10.2

D5019—07a:

Specification for Reinforced Nonvulcanized Polymeric Sheet Used in Roofing Membrane

Table 1507.12.2

D5055—2016:

Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-joists

2303.1.2

D5456—2018:

Specification for Evaluation of Structural Composite Lumber Products

2303.1.10

D5516—2018:

Test Method of Evaluating the Flexural Properties of Fire-retardant Treated Softwood Plywood Exposed to Elevated Temperatures

2303.2.5.1

D5643/D5643M—2006(2018):

Specification for Coal Tar Roof Cement, Asbestos-free

Table 1507.10.2

D5664—2017:

Test Methods for Evaluating the Effects of Fire-retardant Treatments and Elevated Temperatures on Strength Properties of Fire-retardant-treated Lumber

2303.2.5.2

D5665/D5665M—99a(2014)e1:

Specification for Thermoplastic Fabrics Used in Cold-applied Roofing and Waterproofing

Table 1507.10.2

D5726—98(2013):

Specification for Thermoplastic Fabrics Used in Hot-applied Roofing and Waterproofing

Table 1507.10.2

D5882—16:

Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations

1705.10

D6083/D6083M—2018:

Specification for Liquid Applied Acrylic Coating Used in Roofing

Table 1507.10.2Table 1507.13.3

D6162/D6162M—2016:

Specification for Styrene-butadiene-styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements

1507.11.2

D6163/D6163M—2016:

Specification for Styrene-butadiene-styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements

1507.11.2

D6164/D6164M—2016:

Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements

1507.11.2

D6222/D6222M—2016:

Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements

1507.11.2

D6223/D6223M—2016:

Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements

1507.11.2

D6298—2016:

Specification for Fiberglass Reinforced Styrene-butadiene-styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface

1507.11.2

D6305—08(2015)e1:

Practice for Calculating Bending Strength Design Adjustment Factors for Fire-retardant-treated Plywood Roof Sheathing

2303.2.5.1

D6380/D6380M—2003(2018):

Standard Specification for Asphalt Roll Roofing (Organic Felt)

Table 1507.1.1(1)1507.2.8.21507.3.31507.6.5

D6464—2003A(2017):

Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing

Table 2506.22508.4

D6509/D6509M—2016:

Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements

1507.11.2

D6694/D6694M—15:

Standard Specification for Liquid-applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems

Table 1507.13.3

D6754/D6754M—2015:

Standard Specification for Ketone Ethylene Ester Based Sheet Roofing

Table 1507.12.2

D6757/D6757M—2018:

Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep Slope Roofing

1507.1.1Table 1507.1.1(1)1507.17.31507.17.4.1

D6760—16:

Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing

1705.10

D6841—2016:

Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-retardant Treated Lumber

2303.2.5.2

D6878/D6878M—2017:

Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing

Table 1507.12.2

D6947/D6947M—2016:

Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System

Table 1507.13.3

D7032—2017:

Standard Specification for Establishing Performance Ratings for Wood-plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)

705.2.3.12612.22612.42612.5.1

D7147—2011(2018):

Specification for Testing and Establishing Allowable Loads of Joist Hangers

2303.52304.10.4

D7158/D7158M—2019:

Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method)

1504.2 Table 1504.2

D7254—2017:

Standard Specification for Polypropylene (PP) Siding

1403.12

D7425/D7425M—13:

Standard Specification for Spray Polyurethane Foam Used for Roofing Applications

1507.13.2

D7655/D7655M—2012(2017):

Standard Classification for Size of Aggregate Used as Ballast for Roof Membrane Systems

1507.12.3

D7672—14E1:

Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies

2303.1.13

D7949—14:

Standard Test Methods for Thermal Integrity Profiling of Concrete Deep Foundations

1705.10

E84—2018B:

Standard Test Methods for Surface Burning Characteristics of Building Materials

202402.6.4.4406.7.2424.2602.4.1.1602.4.2.1602.4.3.1720.1720.4803.1.2803.5.2803.10803.11803.12803.13806.71402.51403.12.11406.91406.10.11408.91408.10.11511.6.21511.6.32303.22603.32603.4.1.132603.5.42603.5.52603.72604.2.42606.42612.32614.33105.3

E90—2009(2016):

Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements

1206.21206.2.1

E96/E96M—2016:

Standard Test Methods for Water Vapor Transmission of Materials

2021202.31404.3

E108—2017:

Standard Test Methods for Fire Tests of Roof Coverings

1505.12603.62610.22610.3

E119—2018B:

Standard Test Methods for Fire Tests of Building Construction and Materials

703.2.1.1703.2.1.3703.2.1.4703.2.1.5703.2.2703.4703.6704.12705.7705.8.5707.6712.1.13.2714.4.1714.5.1715.3715.4715.4.1Table 716.1(1)Table 716.1(2)Table 716.1(3)716.1.2.3716.2.5.1.1716.2.5.4716.3.2.1.1717.3.1717.5.2717.5.3717.6.1717.6.2Table 721.1(1)2103.12603.5.1

E136—2019:

Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 Degrees C

703.3.1

E283—2004(2012):

Test Method for Determining Rate of Air Leakage through Exterior Windows, Curtain Walls and Doors Under Specified Pressure Differences across the Specimen

202

E330/E330M—14:

Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference

1709.5.21709.5.2.11709.5.3.1

E331—2000(2016):

Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors and Curtain Walls by Uniform Static Air Pressure Difference

1402.21403.2

E336—19a:

Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings

1206.2

E492—2009(2016)E1:

Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-ceiling Assemblies Using the Tapping Machine

1206.3

E605/E605M—93(2015)e1:

Test Method for Thickness and Density of Sprayed Fire-resistive Material (SFRM) Applied to Structural Members

1705.15.4.11705.15.4.21705.15.4.51705.15.5

E648—2017A:

Standard Test Method for Critical Radiant Flux of Floor-covering Systems Using a Radiant Heat Energy Source

406.2.4424.2804.2804.3

E681—09(2015):

Test Methods for Concentration Limits of Flammability of Chemical Vapors and Gases

202

E736/E736M—2017:

Test Method for Cohesion/Adhesion of Sprayed Fire-resistive Materials Applied to Structural Members

704.13.3.21705.15.6

E814—2013A(2017):

Test Method for Fire Tests of Penetration Firestop Systems

202714.4.1.2714.4.2714.5.1.2

E970—2017:

Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

720.3.1

E1007—19:

Test Method f or Field Measurement of Tapping Machine Impact Sound Transmission through Floor-Ceiling Assemblies and Associated Support Structures

1206.3

E1300—2016:

Practice for Determining Load Resistance of Glass in Buildings

2404.12404.22404.3.12404.3.22404.3.32404.3.42404.3.5

E1354—2017:

Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter

424.2602.4.1.1602.4.2.1602.4.3.11402.5

E1592—2005(2017):

Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference

1504.4.2

E1602—2003(2017):

Guide for Construction of Solid Fuel-burning Masonry Heaters

2112.2

E1886—2013A:

Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials

1609.21709.5.3.1

E1966—15:

Standard Test Method for Fire-resistive Joint Systems

202715.3.11709.5.3.1

E1996—2017:

Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes

1609.21609.2.21709.5.3.1

E2072—14:

Standard Specification for Photoluminescent (Phosphorescent) Safety Markings

1025.4

E2174—2018:

Standard Practice for On-site Inspection of Installed Fire Stops

1705.18.1

E2178—13:

Standard Test Method for Air Permeance of Building Materials

202

E2273—2018:

Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies

1407.4.12510.6.2

E2307—15BE1:

Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using the Intermediate-scale, Multistory Test Apparatus

715.4

E2353—2016:

Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards and Balustrades

2407.1.2

E2392 / E2392M—10(2016):

Standard Guide for Design of Earthen Wall Building Systems

2109.2.4.8.9.2

E2393—10a(2015):

Standard Practice for On-site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers

1705.18.2

E2404—2017:

Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facing and Veneers to Assess Surface Burning Characteristics

803.5.2803.121402.5

E2556/E2556M—2010(2016):

Standard Specification for Vapor Permeable Flexible Sheet Water-resistive Barriers Intended for Mechanical Attachment

1403.22510.6.1

E2568—2017A:

Standard Specification for PB Exterior Insulation and Finish Systems

1407.2

E2570/E2570M—07(2014)e1:

Standard Test Method for Evaluating Water-resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) for EIFS with Drainage

1407.4.1.11705.17.1

E2573—2017:

Standard Practice for Specimen Preparation and Mounting of Site-fabricated Stretch Systems to Assess Surface Burning Characteristics

803.10

E2579—2015:

Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics

803.11

E2599—2018:

Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics

2614.3

E2634—2018:

Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems

1903.4

E2652—16:

Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer at 750^oC

703.3.1

E2751/E2751M—2017A:

Practice for Design and Performance of Supported Laminated Glass Walkways

2409.1

E2925—17:

Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function

2510.6.2

F547—2017:

Terminology of Nails for Use with Wood and Wood-base Materials

Table 2506.2

F1667—2018:

Specification for Driven Fasteners: Nails, Spikes and Staples

Table 721.1(2)Table 721.1(3)1507.2.51507.16.52303.6Table 2304.10.22304.10.6 Table 2506.2Table 2603.13.1Table 2603.13.2

F2006—17:

Standard/Safety Specification for Window Fall Prevention Devices for Nonemergency Escape (Egress) and Rescue (Ingress) Windows

1015.8

F2090—17:

Specification for Window Fall Prevention Devices with Emergency Escape (Egress) Release Mechanisms

1015.81015.8.1

F2200—2017:

Standard Specification for Automated Vehicular Gate Construction

3110.2

G152—13:

Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials

1504.7

G154—2016A:

Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials

1504.7

G155—13:

Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials

1504.7

ANSI/AWC NDS—2018:

National Design Specification (NDS) for Wood Construction—with 2018 NDS Supplement

202722.1Table 1604.31809.121810.3.2.4Table 1810.3.2.61905.1.82304.132306.1Table 2306.2(1)Table 2306.2(2)Table 2306.3(1)Table 2306.3(2)2307.1Table 2603.13.2

ANSI/AWC PWF—2021:

Permanent Wood Foundation Design Specification

1805.21807.1.42304.10.6.2

ANSI/AWC SDPWS—2021:

Special Design Provisions for Wind and Seismic

2022305.12305.22305.32306.12306.22306.3Table 2306.3(1)Table 2306.3(3)2307.1

ANSI/AWC WFCM—2018:

Wood Frame Construction Manual for One- and Two-Family Dwellings

1609.1.11609.1.1.12302.12308.2.42308.6.7.22309.1

AWC STJR—2021:

Span Tables for Joists and Rafters

2306.1.12308.4.2.12308.7.12308.7.2

AWC WCD No. 4—2003:

Wood Construction Data—Plank and Beam Framing for Residential Buildings

2306.1.2

12-B—14:

Technical Manual 12B, Third Edition; Standard Practice for the Testing and Inspection of Field Applied Thin Film Intumescent Fire-resistive Materials; an Annotated Guide

1705.16

C1—03:

All Timber Products—Preservative Treatment by Pressure Processes

1505.6

M4—15:

Standard for the Care of Preservative-treated Wood Products

1810.3.2.4.12303.1.9

U1—20:

USE CATEGORY SYSTEM: User Specification for Treated Wood Except Commodity Specification H

Table 1507.9.61807.1.41807.3.11809.121810.3.2.4.12303.1.92304.12.12304.12.22304.12.2.6 2304.12.2.7 2304.12.2.8

D1.4/D1.4M—2018:

Structural Welding Code—Steel Reinforcing Bars

1704.5Table 1705.31705.3.12107.3

A156.10—2017:

Power Operated Pedestrian Doors

1010.3.2

A156.19—2019:

Power Assist and Low Energy Power Operated Swinging Doors

1010.3.2

A156.27—2019:

Power and Manual Operated Revolving Pedestrian Doors

1010.3.1.1

A156.38—2019:

Low Energy Power Operated Sliding and Folding Doors

1010.3.2

BS EN 15250—2007:

Slow Heat Release Appliances Fired by Solid Fuel Requirements and Test Methods

2112.22112.5

EN 1081—98:

Resilient Floor Coverings—Determination of the Electrical Resistance

406.7.1

ANSI A135.4—2012:

Basic Hardboard

1403.3.12303.1.7

ANSI A135.5—2012:

Prefinished Hardboard Paneling

2303.1.72304.7

ANSI A135.6—2012:

Engineered Wood Siding

1403.3.22303.1.7

ANSI A208.1—2016:

Particleboard

2303.1.82303.1.8.1

16 CFR Part 1201 (2002):

Safety Standard for Architectural Glazing Material

2406.2Table 2406.2(1)2406.3.12407.12407.1.4 2408.2.12408.32409.22409.4.1

16 CFR Part 1209 (2002):

Interim Safety Standard for Cellulose Insulation

720.6

16 CFR Part 1404 (2002):

Cellulose Insulation

720.6

16 CFR Part 1500 (2009):

Hazardous Substances and Articles; Administration and Enforcement Regulations

202

16 CFR Part 1500.44 (2009):

Method for Determining Extremely Flammable and Flammable Solids

202

16 CFR Part 1507 (2002):

Fireworks Devices

202

16 CFR Part 1630 (2007):

Standard for the Surface Flammability of Carpets and Rugs

804.4.1

AAMA/WDMA/CSA 101/I.S.2/A440—17:

North American Fenestration Standard/Specifications for Windows, Doors and Unit Skylights

1709.5.12405.5

ASME A17.1—2019/CSA B44-—2019:

Safety Code for Elevators and Escalators

907.3.3911.1.61009.4.11607.11.13001.2Table 3001.33001.53002.53003.23007.13008.1.43008.7.1

ASME A17.7—2007/CSA B44.7—07(R2017):

Performance-based Safety Code for Elevators and Escalators

Table 3001.33001.53002.5

CSSB—97:

Grading and Packing Rules for Western Red Cedar Shakes and Western Red Shingles of the Cedar Shake and Shingle Bureau

Table 1507.8.5Table 1507.9.6

ANSI/DASMA 107—2012:

Room Fire Test Standard for Garage Doors Using Foam Plastic Insulation

2603.4.1.9

ANSI/DASMA 108—2017:

Standard Method for Testing Sectional Garage Doors, Rolling Doors and Flexible Doors: Determination of Structural Performance Under Uniform Static Air Pressure Difference

1709.5.2.1

ANSI/DASMA 115—2017:

Standard Method for Testing Sectional Doors, Rolling Doors and Flexible Doors: Determination of Structural Performance Under Missile Impact and Cyclic Wind Pressure

1609.2.3

ANSI/HPVA HP-1—2016:

American National Standard for Hardwood and Decorative Plywood

2303.32304.7

PS 1—19:

Structural Plywood

2303.1.52304.7Table 2304.8(4)Table 2304.8(5)Table 2306.2(1)Table 2306.2(2)

PS 2—18:

Performance Standard for Wood-based Structural-use Panels

2303.1.52304.7Table 2304.8(5)Table 2306.2(1)Table 2306.2(2)

PS 20—05:

American Softwood Lumber Standard

2021810.3.2.42303.1.1

29 CFR Part 1910.1000 (2015):

Air Contaminants

202

49 CFR 173.192—2011:

Packaging for Certain Toxic Gases in Hazard Zone A

Table 415.6.5

49 CFR Parts 100–185—2015:

Hazardous Materials Regulations

202

49 CFR Parts 173–178—2015:

Specification of Transportation of Explosive and Other Dangerous Articles, UN 0335, UN 0336 Shipping Containers

202

49 CFR Parts 173.137—(2009):

Shippers—General Requirements for Shipments and Packaging—Class 8—Assignment of Packing Group

202

EN 459-1—15:

Building Lime. Definitions, Specifications and Conformity Criteria

2109.2.4.8.7

FEMA-TB-11—01:

Crawlspace Construction for Buildings Located in Special Flood Hazard Areas

1805.1.2.1

4430—2012:

Approval Standard for Heat and Smoke Vents

910.3.1

4450—(1989):

Approval Standard for Class 1 Insulated Steel Deck Roofs—with Supplements through July 1992

1510.2

4470—2016:

Approval Standard for Single-ply Polymer-modified Bitumen Sheet, Built-up Roof (BUR) and Liquid Applied Roof Assemblies for Use in Class 1 and Noncombustible Roof Deck Construction

1504.8

4474—2011:

American National Standard for Evaluating the Simulated Wind Uplift Resistance of Roof Assemblies Using Static Positive and/or Negative Differential Pressures

1504.4.11504.4.21504.4.3

4880—2017:

American National Standard for Evaluating the Fire Performance Insulated Building Panel Assemblies and Interior Finish Materials

2603.42603.9

GA-216—2018:

Application and Finishing of Gypsum Panel Products

Table 2508.12509.2

GA-600—2018:

Fire-resistance and Sound Control Design Manual, 22nd Edition

Table 721.1(1)Table 721.1(2)Table 721.1(3)

ICC 300—17:

ICC Standard on Bleachers, Folding and Telescopic Seating and Grandstands

1030.1.11030.71607.19

ICC 400—17:

Standard on Design and Construction of Log Structures

2302.1

ICC 500—2020:

ICC/NSSA Standard for the Design and Construction of Storm Shelters

202423.1423.2423.3.1423.3.2423.4423.51031.21604.5.11604.10

ICC 600—2020:

Standard for Residential Construction in High-wind Regions

1609.1.11609.1.1.12308.2.4

ICC 900/SRCC 300—2020:

Solar Thermal System Standard

3111.2.1

ICC 901/SRCC 100—2020:

Solar Thermal Collector Standard

3111.2.1

ICC 1100—18:

Standard for Spray-applied Foam Plastic Insulation

2603.1.1

ICC A117.1—17:

Accessible and Usable Buildings and Facilities

202907.5.2.3.31009.8.21009.91009.111010.2.13.11012.11012.6.51012.101013.41023.91102.11108.21110.11110.21110.5.11110.5.21112.31112.41112.51112.5.21207.1

IEBC—21:

International Existing Building Code^®

101.4.7102.6116.5201.3Table 504.3Table 504.42701.12801.13113.1.1

IECC—21:

International Energy Conservation Code^®

101.4.6201.32021202.11202.4.3.21301.1.1

IPMC—21:

International Property Maintenance Code^®

101.4.4102.6102.6.2103.32701.12801.1

IPSDC—21:

International Private Sewage Disposal Code^®

101.4.32901.1

ISPSC—21:

International Swimming Pool and Spa Code^®

3109.1

IWUIC—21:

International Wildland-Urban Interface Code^®

Table 1505.1

SBCCI SSTD 11—97:

Test Standard for Determining Wind Resistance of Concrete or Clay Roof Tiles

1504.3.1.11504.3.1.21504.3.1.3

SCFC—21:

South Carolina Fire Code

101.4.5102.6102.6.2201.3202307.1Table 307.1(1)Table 307.1(2)307.1.1403.4.5404.2406.2.9406.6.4.4406.7406.8407.4410.2.6411.1412.1412.5.1413.1414.1.1414.1.2414.1.2.1414.2Table 414.2.5(1)Table 414.2.5(2)414.2.5.1414.2.5.2414.2.5.3414.3414.5414.5.1Table 414.5.1414.5.2414.5.3414.6415.2415.6.1415.6.2415.6.3415.6.4415.6.4.1415.6.4.4Table 415.6.5415.8.2415.9415.9.1415.9.1.3415.9.1.4415.9.1.6415.9.1.7415.9.1.8415.9.2415.9.3415.10415.11415.11.1.7415.11.5415.11.8.2415.11.10.3415.11.11.1416.1416.2.3416.4419.1422.3.1426.1426.1.4427.1427.2.3428.1428.2428.3Table 504.3Table 504.4Table 506.2507.4507.8.1.1.1507.8.1.1.2507.8.1.1.3Table 509.1705.8.1707.1707.4Table 716.1(2)716.2.5.4.1716.3.2.1.1.1806.3901.2901.3901.5901.6.3901.6.4903.2.7.1Table 903.2.11.6903.2.12903.5904.2.2904.11.3905.1905.3.6905.3.7906.1Table 906.1906.4907.1.1907.2.5907.2.6907.2.8907.2.13.2907.2.15907.2.16907.2.23907.5.2.2907.6.6907.6.6.3907.8909.6.3909.12.1909.19909.20910.2.2910.5912.4.3915.1915.6916.7916.11918.11002.11002.21010.2.141202.5.21202.61507.151512.1Table 1604.52603.4.1.122701.12702.1.32702.2.32702.2.72702.2.102702.2.132702.2.152702.43003.33008.1.33102.13102.8.33103.13111.1.23111.23111.33111.3.43111.3.53302.33303.73309.2

SCFGC—21:

South Carolina Fuel Gas Code

101.4.1201.3Table 307.1(1)415.9.22113.11.1.22113.152702.2.62801.1

SCMC—21:

South Carolina Mechanical Code

101.4.2201.3Table 307.1(1)406.2.9406.6.2406.8.1407.2.7409.3412.5.6414.1.2414.3415.9.1415.9.2415.9.3415.11.12416.2.3420.9420.10420.11.1421.4422.7426.1.4427.2.2427.2.3602.4.2.5602.4.3.5602.4.4.3603.1603.1.1603.1.2712.1.6715.4715.7717.2.2717.5.2717.5.3717.6.1717.6.2717.6.3718.5720.1720.7903.2.11.4904.2.2904.13907.3.1909.1909.10.2909.13.1910.4.71006.2.2.31011.161020.6.11202.11202.2.21202.4.3.21202.5.2.11202.61209.32702.2.52801.13111.2

SCPC—21:

South Carolina Plumbing Code

101.4.3201.3415.9.3603.1.2718.5903.3.51205.3.31503.41805.4.32901.1Table 2902.13111.23305.1

SCRC—21:

South Carolina Residential Code

101.2102.6.1104.2.1110.3.3305.2.3308.2.4308.3.2308.5.4310.1310.4.1310.4.22308.1

ISO 668—2013:

Series 1 Freight Containers—Classifications, Dimensions and Ratings

Table 3115.8.5.3

ISO 1496-1—2013:

Series 1 Freight Containers—Specification and Testing - Part 1: General Cargo Containers for General Purposes

3115.8Table 3115.8.5.3

ISO 6346—1995:

Freight Containers—Code, Identification and Marking with Amendment 3 - 2012

3115.3

ISO 8115—86:

Cotton Bales—Dimensions and Density

Table 307.1(1)Table 415.11.1.1.1

ISO 8336—09:

Fiber-cement Flat Sheets—Product Specification and Test Methods

1403.101404.16.11404.16.2Table 2509.2

ANSI MH29.1—2012 (a revision of MH29.1:2008):

Safety Requirements for Industrial Scissors Lifts

Table 3001.3

ANSI/MH16.1—12:

Specification for the Design, Testing and Utilization of Industrial Steel Storage Racks

Table 1705.13.7

FP 1001—2007:

Guide Specifications for Design of Metal Flag Poles

1609.1.1

TEK 5—8B(2005):

Detailing Concrete Masonry Fire Walls

Table 721.1(2)

04—21:

Standard for Integrated Fire Protection and Life Safety System Testing

901.6.2.1901.6.2.2

10—18:

Standard for Portable Fire Extinguishers

906.2Table 906.3(1)Table 906.3(2)906.3.2906.3.4

11—16:

Standard for Low-, Medium, and High-expansion Foam

904.7

12—18:

Standard on Carbon Dioxide Extinguishing Systems

904.8904.13

12A—18:

Standard on Halon 1301 Fire Extinguishing Systems

904.9

13—19:

Standard for the Installation of Sprinkler Systems

403.3.3712.1.3.1903.3.1.1903.3.2903.3.8.2903.3.8.5904.13905.3.4907.6.41019.3

13D—19:

Standard for the Installation of Sprinkler Systems in One- and Two-family Dwellings and Manufactured Homes

903.3.1.3

13R—19:

Standard for the Installation of Sprinkler Systems in Low-rise Residential Occupancies

903.3.1.2903.3.5.2903.4

14—19:

Standard for the Installation of Standpipe and Hose Systems

905.2905.3.4905.4.2905.6.2905.8

16—19:

Standard for the Installation of Foam-water Sprinkler and Foam-water Spray Systems

904.7904.13

17—21:

Standard for Dry Chemical Extinguishing Systems

904.6904.13

17A—21:

Standard for Wet Chemical Extinguishing Systems

904.5904.13

20—19:

Standard for the Installation of Stationary Pumps for Fire Protection

412.2.4.1913.1913.2913.2.1913.5

30—21:

Flammable and Combustible Liquids Code

415.6.1415.6.2507.8.1.1.1507.8.1.1.2

30A—21:

Code for Motor Fuel Dispensing Facilities and Repair Garages

406.2.9.2

31—20:

Standard for the Installation of Oil-burning Equipment

2113.15

32—16:

Standard for Drycleaning Facilities

415.9.3

40—19:

Standard for the Storage and Handling of Cellulose Nitrate Film

409.1

45—19:

Standard on Fire Protection for Laboratories Using Chemicals

428.3.7

58—20:

Liquefied Petroleum Gas Code

415.9.2

61—20:

Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Processing Facilities

426.1

70—20:

National Electrical Code

108.3406.2.7406.2.9412.5.7415.11.1.8Table 509.1904.3.1907.6.1909.12.2909.16.3910.4.61204.4.12701.12702.1.33111.3

72—19:

National Fire Alarm and Signaling Code

407.4.4.5407.4.4.5.1901.6903.4.1904.3.5907.1.2907.2907.2.6907.2.9.3907.2.11907.2.13.2907.3907.3.3907.3.4907.5.2.1.2907.5.2.2907.5.2.2.5907.6907.6.1907.6.2907.6.6907.7907.7.1907.7.2911.1.6917.12702.2.43005.53007.7

80—19:

Standard for Fire Doors and Other Opening Protectives

410.2.5509.4.2716.1716.2.5.1716.2.6.4716.2.9716.3.4.1716.3.5716.4.31010.3.3

82—19:

Standard on Incinerators and Waste and Linen Handling Systems and Equipment

713.13

85—19:

Boiler and Combustion Systems Hazards Code

426.1

92—18:

Standard for Smoke Control Systems

909.7909.8

99—21:

Health Care Facilities Code

407.11422.6425.1

101—21:

Life Safety Code

1030.6.2

105—19:

Standard for Smoke Door Assemblies and Other Opening Protectives

405.4.2710.5.2.2716.2.10909.20.4.1

110—19:

Standard for Emergency and Standby Power Systems

2702.1.3

111—19:

Standard on Stored Electrical Energy Emergency and Standby Power Systems

2702.1.3

120—20:

Standard for Fire Prevention and Control in Coal Mines

426.1

170—18:

Standard for Fire Safety and Emergency Symbols

1025.2.6.1

211—19:

Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances

2112.5

221—21:

Standard for High Challenge Fire Walls, Fire Walls and Fire Barrier Walls

706.2Table 716.1(2)

252—17:

Standard Methods of Fire Tests of Door Assemblies

Table 716.1(1)716.1.1716.1.2.2.1716.2.1.1716.2.1.2716.2.2.1716.2.2.2716.2.2.3.1716.2.5.1.1

253—19:

Standard Method of Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source

406.2.4424.2804.2804.3

257—17:

Standard on Fire Test for Window and Glass Block Assemblies

Table 716.1(1)716.1.1716.1.2.2.2716.3.1.1716.3.1.2716.3.2.1.3716.3.4

259—18:

Standard Test Method for Potential Heat of Building Materials

2603.4.1.102603.5.3

265—19:

Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile or Expanded Vinyl Wall Coverings on Full Height Panels and Walls

803.5.1803.5.1.1

268—17:

Standard Test Method for Determining Ignitability of Exterior Wall Assemblies Using a Radiant Heat Energy Source

1405.1.1.11405.1.1.1.11405.1.1.1.22603.5.7

275—17:

Standard Method of Fire Tests for the Evaluation of Thermal Barriers

508.4.4.1509.4.1.11406.10.21408.10.22603.4

276—19:

Standard Method of Fire Test for Determining the Heat Release Rate of Roofing Assemblies with Combustible Above-deck Roofing Components

1508.12603.32603.4.1.5

285—19:

Standard Fire Test Method for the Evaluation of Fire Propagation Characteristics of Exterior Wall Assemblies Containing Combustible Components

718.2.61402.51406.10.31408.10.41511.6.22603.5.5

286—19:

Standard Methods of Fire Test for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth

402.6.4.4424.2803.1.1803.1.1.1803.11803.12803.131406.10.21408.10.32603.72603.92604.2.42614.43105.3

288—17:

Standard Methods of Fire Tests of Horizontal Fire Door Assemblies Installed in Horizontal Fire Resistance-rated Assemblies

712.1.13.1

289—19:

Standard Method of Fire Test for Individual Fuel Packages

402.6.2402.6.4.5424.2806.4

409—16:

Standard on Aircraft Hangars

412.3.6Table 412.3.6412.3.6.1412.5.5

418—16:

Standard for Heliports

412.7.4

484—19:

Standard for Combustible Metals

426.1

652—19:

Standard on the Fundamentals of Combustible Dust

426.1

654—20:

Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing and Handling of Combustible Particulate Solids

426.1

655—17:

Standard for the Prevention of Sulfur Fires and Explosions

426.1

664—20:

Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities

426.1

701—19:

Standard Methods of Fire Tests for Flame Propagation of Textiles and Films

410.2.6424.2806.43102.33102.3.13102.6.1.13105.3

704—17:

Standard System for the Identification of the Hazards of Materials for Emergency Response

202415.5.2

720—15:

Standard for the Installation of Carbon Monoxide (CO) Detection and Warning Equipment

915.5.1915.5.2

750—19:

Standard on Water Mist Fire Protection Systems

202904.11.1.1904.13

1124—17:

Code for the Manufacture, Transportation and Storage of Fireworks and Pyrotechnic Articles

415.6.4.1

2001—18:

Standard on Clean Agent Fire Extinguishing Systems

904.10

2010—20:

Standard for Fixed Aerosol Fire-extinguishing Systems

904.12

PCI 124—18:

Specification for Fire Resistance of Precast Prestressed Concrete

722.1722.2.3.1

PCI 128—19:

Specification for Glass Fiber Reinforced Concrete Panels

1903.3

PTI DC—10.5-19:

Standard Requirements for Design and Analysis of Shallow Post-Tensioned Concrete Foundations on Expansive and Stable Soils

1808.6.2

ANSI MH16.1—12:

Specification for the Design, Testing and Utilization of Industrial Steel Storage Racks

2209.1

ANSI MH16.3—16:

Specification for the Design, Testing and Utilization of Industrial Steel Cantilevered Storage Racks

2209.2

ANSI/SBCA FS 100—2012(R2018):

Standard Requirements for Wind Pressure Resistance of Foam Plastic Insulating Sheathing Used in Exterior Wall Covering Assemblies

2603.10

SDI NC—2017:

Standard for Noncomposite Steel Floor Deck

2210.1.1.1

SDI RD—2017:

Standard for Steel Roof Deck

2210.1.1.2

SDI-C—2017:

Standard for Composite Steel Floor Deck—Slabs

2210.1.1.3

SDI-QA/QC—2017:

Standard for Quality Control and Quality Assurance for Installation of Steel Deck

1705.2.2

SJI 100—20:

45th Edition Standard Specifications, Load Tables and Weight Tables for K-Series, LH-Series, DLH-Series and Joist Girders

1604.3.32203.12207.1

SJI 200—15:

2nd Edition Standard Specifications, Weight Tables and Bridging Tables for CJ-Series Composite Steel Joists

1604.3.32203.12207.1

ANSI/SPRI RP-4—2019:

Wind Design Standard for Ballasted Single-ply Roofing Systems

1504.5

ANSI/SPRI VF-1—2017:

External Fire Design Standard for Vegetative Roofs

1505.10

ANSI/SPRI/FM 4435/ES-1—2017:

Test Standard for Edge Systems Used with Low Slope Roofing Systems

1504.6

ANSI/SPRI GT-1—2016:

Test Standard for Gutter Systems

1504.6.1

ICC 900/SRCC 300—2020:

Solar Thermal System Standard

3111.2.1

ICC 901/SRCC 100—2020:

Solar Thermal Collector Standard

3111.2.1

ANSI/TIA 222-H—2017:

Structural Standard for Antenna Supporting Structures, Antennas and Small Wind Turbine Support Structures

1609.1.13108.13108.2

216—2014:

Standard Method for Determining Fire Resistance of Concrete and Masonry Construction Assemblies

Table 721.1(2)722.1

302—2018:

Standard Method for Determining the Sound Transmission Ratings for Masonry Walls

1208.2.1

402—2016:

Building Code Requirements for Masonry Structures

1404.61404.6.21404.101604.3.41705.41807.1.6.3.21808.92101.22106.12107.12107.22107.32108.12108.22108.32109.12109.1.12109.22110.12114.12114.4

403—2017:

Direct Design Handbook for Masonry Structures

2101.2

404—2016:

Standard for the Design of Architectural Cast Stone

2101.2

504—2016:

Standard for the Fabrication of Architectural Cast Stone

2103.1

602—2016:

Specification for Masonry Structures

1404.6.11705.41705.4.11807.1.6.32103.12103.2.12103.32103.42104.12105.1

604—2016:

Standard for the Installation of Architectural Cast Stone

2104.1

TPI 1—2014:

National Design Standard for Metal-plate-connected Wood Truss Construction

2303.4.62306.1

9—2009:

Fire Tests of Window Assemblies—with Revisions through February 2015

Table 716.1(1)716.1.1716.1.2.2.2716.2.1.3716.3.1.1716.3.1.2716.3.2.1.3716.3.41013.5

10A—2009:

Tin Clad Fire Doors—with Revisions through July 2018

716.2.1

10B—2008:

Fire Tests of Door Assemblies—with Revisions through February 2015

Table 716.1(1)716.1.1716.1.2.2.1716.2.1.2716.2.2.2716.2.2.3.1716.2.5.1.1

10C—2016:

Positive Pressure Fire Tests of Door Assemblies

Table 716.1(1)716.1.1716.1.2.2.1716.2.1.1716.2.2.1716.2.2.2716.2.2.3.1716.2.5.1.11010.2.9.3

10D—2017:

Standard for Fire Tests of Fire Protective Curtain Assemblies

716.4

14B—2008:

Sliding Hardware for Standard Horizontally Mounted Tin Clad Fire Doors—with Revisions through July 2017

716.2.1

14C—2006:

Swinging Hardware for Standard Tin Clad Fire Doors Mounted Singly and in Pairs—with Revisions through July 2017

716.2.1

55A—2004:

Materials for Built-up Roof Coverings

1507.10.2

103—2010:

Factory-built Chimneys, for Residential Type and Building Heating Appliances—with Revisions through March 2017

718.2.5.1

127—2011:

Factory-built Fireplaces—with Revisions through July 2016

718.2.5.12111.12

199E—2004:

Outline of Investigation for Fire Testing of Sprinklers and Water Spray Nozzles for Protection of Deep Fat Fryers

904.13.4.1

217—2015:

Single and Multiple Station Smoke Alarms—with Revisions through November 2016

907.2.11

263—11:

Fire Tests of Building Construction and Materials—with Revisions through March 2018

703.2703.2.1.3703.2.1.5703.2.2703.4703.4704.12705.7705.8.5707.6712.1.13.2714.4.1714.5.1715.3Table 716.1(1)Table 716.1(3)716.1.2.3716.2.5.1.1716.2.5.4716.3.2.1.1717.3.1717.5.2717.5.3717.6.1717.6.2Table 721.1(1)2103.12603.5.1

268—2016:

Smoke Detectors for Fire Alarm Systems-with revisions through July 2016

407.9907.2.6.2907.2.11.7

294—2018:

Access Control System Units—with Revisions through October 2018

1010.2.111010.2.121010.2.13.11010.2.14

300—2005(R2010):

Fire Testing of Fire Extinguishing Systems for Protection of Commercial Cooking Equipment—with Revisions through December 2014

904.13

300A—2006:

Outline of Investigation for Extinguishing System Units for Residential Range Top Cooking Surfaces

904.14.1.1

305—2012:

Panic Hardware—with Revisions through March 2017

1010.2.9.3

325—2017:

Door, Drapery, Gate, Louver and Window Operations and Systems

406.2.13110.3

555—2006:

Fire Dampers—with Revisions through October 2016

717.3.1

555C—2014:

Ceiling Dampers—with Revisions through May 2017

717.3.1

555S—2014:

Smoke Dampers—with Revisions through October 2016

717.3.1

580—2006:

Test for Uplift Resistance of Roof Assemblies—with Revisions through October 2018

1504.4.11504.4.2

641—2010:

Type L Low-temperature Venting Systems—with Revisions through April 2018

2113.11.1.4

710B—2011:

Recirculating Systems—with Revisions through August 2014

904.13

723—2018:

Test for Surface Burning Characteristics of Building Materials

202402.6.4.4406.7.2720.1720.4803.1.2803.5.2803.10803.11803.12803.13806.71402.51403.12.11406.91406.10.11408.91408.10.11511.6.21511.6.32303.22603.32603.4.1.132603.5.42603.5.52603.72604.2.42606.42612.32614.33105.3

723S—2006:

Drop-Out Ceilings Installed Beneath Automatic Sprinklers

2606.7.4

790—2004:

Standard Test Methods for Fire Tests of Roof Coverings—with Revisions through October 2018

1505.12603.62610.22610.3

793—2008:

Automatically Operated Roof Vents for Smoke and Heat—with Revisions through March 2017

910.3.1

864—2014:

Control Units and Accessories for Fire Alarm Systems—with Revisions through March 2018

909.12

924—2016:

Safety Emergency Lighting and Power Equipment—with Revisions through May 2018

1013.5

1040—1996:

Fire Test of Insulated Wall Construction—with Revisions through April 2017

1406.10.2 2603.9

1256—02:

Fire Test of Roof Deck Construction—with Revisions through August 2018

1508.12603.32603.4.1.5

1479—2015:

Fire Tests of Penetration Firestops

202714.4.1.2714.4.2714.5.1.2714.5.4

1482—2011:

Solid-fuel Type Room Heaters—with Revisions through August 2015

2112.22112.5

1489—2016:

Fire Resistant Pipe Protection Systems Carrying Combustible Liquids

403.4.8.2

1703—2002:

Flat-plate Photovoltaic Modules and Panels—with Revisions through September 2018

1507.17.53111.3.1

1715—97:

Fire Test of Interior Finish Material—with Revisions through April 2017

1406.10.2 2603.92614.4

1741—2010:

Inverters, Converters, Controllers and Interconnection System Equipment for Use with Distributed Energy Resources—with Revisions through February 2018

3111.3.1

1777—2007:

Chimney Liners—with Revisions through April 2014

2113.11.12113.19

1784—2015:

Air Leakage Tests of Door Assemblies

405.4.3710.5.2.2710.5.2.2.1716.2.1.4716.2.9.1716.2.9.33006.33007.6.33008.6.3

1897—2015:

Uplift Tests for Roof Covering Systems

1504.4.11504.4.3

1975—06:

Fire Tests for Foamed Plastics Used for Decorative Purposes

402.6.2402.6.4.5424.2

1994—2015:

Luminous Egress Path Marking Systems

411.61008.2.11025.2.11025.2.31025.2.41025.2.51025.4

2034—2017:

Single- and Multiple-station Carbon Monoxide Alarms—with Revisions through September 2018

915.4.2915.4.4

2075—2013:

Standard for Gas and Vapor Detectors and Sensors—with Revisions through December 2017

915.5.1915.5.3

2079—2015:

Tests for Fire Resistance of Building Joint Systems

202715.3.1715.8

2196—2017:

Standard for Fire Test for Circuit Integrity of Fire-Resistive Power, Instrumentation, Control and Data Cables

909.20.7.1913.2.22702.33007.8.13008.8.2

2200—2012:

Stationary Engine Generator Assemblies—with Revisions through October 2015

2702.1.1

2202—2009:

Electric Vehicle (EV) Charging System Equipment—with Revisions through February 2018

406.2.7

2594—2016:

Electric Vehicle Supply Equipment

406.2.7

2703—2014:

Mounting Systems, Mounting Devices, Clamping/Retention Devices and Ground Lugs for Use with Flat-plate Photovoltaic Modules and Panels—with Revisions through December 2019

1505.9

7103—19:

Outline of Investigation for Building-Integrated Photovoltaic Roof Coverings

Table 1504.21507.16.6

61730-1—2017:

Photovoltaic (PV) Module Safety Qualification - Part 1: Requirements for Construction

1507.16.61507.17.53111.3.1

61730-2—2017:

Photovoltaic (PV) Module Safety Qualification - Part 2: Requirements for Testing

1507.16.61507.17.53111.3.1

CAN/ULC S 102.2—2018:

Standard Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings and Miscellaneous Materials and Assemblies

720.2720.3720.4

18 USC Part 1, Ch. 40:

Importation, Manufacture, Distribution and Storage of Explosive Materials

202

AITC 104—03:

Typical Construction Details

2306.1

AITC 110—01:

Standard Appearance Grades for Structural Glued Laminated Timber

2306.1

AITC 113—10:

Standard for Dimensions of Structural Glued Laminated Timber

2306.1

AITC 119—96:

Standard Specifications for Structural Glued Laminated Timber of Hardwood Species

2306.1

AITC 200—09:

Manufacturing Quality Control Systems Manual for Structural Glued Laminated Timber

2306.1

AAMA/WDMA/CSA 101/I.S.2/A440—17:

North American Fenestration Standard/Specification for Windows, Doors and Skylights

1709.5.12405.5

WRI/CRSI—81:

Design of Slab-on-ground Foundations—with 1996 Update

1808.6.2