Chapter 11 Referenced Standards

ACI

American Concrete Institute

38800 Country Club Drive

Farmington Hills, MI, 48331-3439

ACI 318—19

Building Code Requirements for Structural Concrete

Table 307.2.2

AHRI

Air Conditioning, Heating & Refrigeration Institute

2311 Wilson Boulevard, Suite 400

Arlington, VA, 22201

400 (I-P)—2015

Performance Rating of Liquid to Liquid Heat Exchangers

Table 317.2(1)

1160 (I-P)—2022

Performance Rating of Heat Pump Pool Heaters—(with Addendum 1)

Table 317.2(1)

ANSI

American National Standards Institute

25 West 43rd Street, 4th Floor

New York, NY, 10036

A108/A118/A136.1—2019

Specifications for Installation of Ceramic Tile

Table 307.2.2

A326.3—18

Test Method for Measuring Dynamic Coefficient of Friction for Hard Surface Floor Materials

306.2

Z21.56a:19/CSA 4.719

Gas Fired Pool Heaters

Table 317.2(1)

APSP

Pool & Hot Tub Alliance (formerly The Association of Pool & Spa Professionals)

2111 Eisenhower Avenue, Suite 500

Alexandria, VA, 22314

ANSI/APSP/ICC 4—2012

American National Standard for Aboveground/Onground Residential Swimming Pools—Includes Addenda A Approved April 4, 2013

702.2.1

ANSI/APSP/ICC 14—2019

American National Standard for Portable Electric Spa Energy Efficiency

303.2

ANSI/APSP/ICC 16—2017

American National Standard for Suction Outlet Fitting Assemblies (SOFA) for Use in Pools, Spas, and Hot Tubs

202, 312.4.1, 312.4.4, 505.2.1, 612.4.2

ANSI/APSP/ICC/NPC 12—2016

American National Standard for the Plastering of Swimming Pools and Spas

307.2.5

ASCE/SEI

American Society of Civil Engineers Structural Engineering Institute

1801 Alexander Bell Drive

Reston, VA, 20191-4400

ASCE/SEI 24—14

Flood Resistant Design & Construction

304.3

ASHRAE

180 Technology Parkway

Peachtree Corners, GA, 30092

62.1—2022

Ventilation for Acceptable Air Quality

326.1

ASME

American Society of Mechanical Engineers

Two Park Avenue

New York, NY, 10016-5990

A112.1.2—2012 (R2022)

Air Gaps in Plumbing Systems (For Plumbing Fixtures and Water-connected Receptors)

319.2

B16.15—2023

Cast Alloy Threaded Fittings: Classes 125 and 250

Table 312.4.1

ASTM

ASTM International

100 Barr Harbor, P.O. Box C700

West Conshohocken, PA, 19428-2959

A182/A182M—21

Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-temperature Service

Table 312.4.1

A240/A240M—20a

Standard Specification for Chromium and Chromium-nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels and for General Applications

Table 307.2.2

A312/A312M—21

Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

Table 312.4

A403/A403M—20

Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

Table 312.4.1

B88—20

Standard Specification for Seamless Copper Water Tube

Table 312.4

B447—12a(2021)

Specification for Welded Copper Tube

Table 312.4

D1527—99(2005)

Specification for Acrylonitrile Butadiene Styrene (ABS) Plastic Pipe, Schedules 40 and 80

Table 312.4, Table 312.4.1

D1593—19

Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting

Table 307.2.2

D1785—21a

Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80 and 120

Table 312.4

D2241—21

Standard Specification for Poly (Vinyl Chloride) (PVC) Pressure-rated Pipe (SDR Series)

Table 312.4

D2464—15

Standard Specification for Threaded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

Table 312.4.1

D2466—21

Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40

Table 312.4.1

D2467—20

Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

Table 312.4.1

D2672—20e1

Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement

Table 312.4

D2846/D2846M—19a

Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems

Table 312.4, Table 312.4.1

D3787—16(2020)

Standard Test Method for Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test

305.2.4.1

D5034—09(2017)

Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)

305.2.4.1

F437—21

Standard Specification for Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

Table 312.4.1

F438—2017

Standard Specification for Socket-type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40

Table 312.4.1

F439—19

Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

Table 312.4.1

F1346—1991(2018)

Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs

305.1, 305.4

F2286—16

Standard Design and Performance Specification for Removable Mesh Fencing for Swimming Pools, Hot Tubs, and Spas

305.2.5

CPSC

Consumer Product Safety Commission

4330 East-West Highway

Bethesda, MD, 20814

16 CFR Part 1207 (2004)

Safety Standard for Swimming Pool Slides

406.10

CSA

CSA Group

8501 East Pleasant Valley Road

Cleveland, OH, 44131-5516

B137.2—23

Polyvinylchloride (PVC) Injection-moulded Gasketed Fittings for Pressure Application

Table 312.4, Table 312.4.1

B137.3—23

Rigid Polyvinylchloride (PVC) Pipe and Fittings for Pressure Applications

Table 312.4, Table 312.4.1

B137.6—23

Chlorinated Polyvinylchloride (CPVC) Pipe, Tubing, and Fittings for Hot- and Cold-water Distribution Systems

Table 312.4, Table 312.4.1

C22.2 No. 108—14(R2019)

Liquid Pumps

314.8

C22.2 No. 218.1—13 (2017)

Spas, Hot Tubs and Associated Equipment

302.3, 310.1, 311.1, 314.8, Table 317.2(1), 318.2, 1001.4, 1001.7

C22.2 No. 236—15

Heating and Cooling Equipment

Table 317.2(1)

Z21.56a—19/CSA 4.7—19

Gas Fired Pool Heaters

Table 317.2(1)

IAPMO

4755 E. Philadelphia Street

Ontario, CA, 91761-USA

IAPMO Z124.7—2013

Prefabricated Plastic Spa Shells

Table 307.2.2

ICC

International Code Council, Inc.

200 Massachusetts Avenue, NW, Suite 250

Washington, DC, 20001

IBC—24

International Building Code^®

201.3, 304.2, 306.1, 307.2, 410.1

ICC 901/SRCC 100—2020

Solar Thermal Collector Standard

317.6.2

ICC 902/APSP/SRCC 400—2020

Solar Pool and Spa Heating System Standard

Table 317.2(2)

ICC A117.1—2017 with Supplement 1

Standard for Accessible and Usable Buildings and Facilities

307.1.5

IECC—24

International Energy Conservation Code^®

201.3, 317.4

IFC—24

International Fire Code^®

201.3

IFGC—24

International Fuel Gas Code^®

201.3, 317.4

IMC—24

International Mechanical Code^®

201.3, 317.4

IPC—24

International Plumbing Code^®

201.3, 302.2, 302.5, 302.6, 306.8, 319.2, 410.1

IRC—24

International Residential Code^®

102.7.1, 201.3, 302.1, 302.5, 302.6, 304.2, 306.1, 306.3, 306.8, 307.2, 317.4, 319.2, 322.2.1, 322.4, 703.1, 802.1, 802.2

NEMA

National Electrical Manufacturers Association

1300 North 17th Street Suite 900

Rosslyn, VA, 22209

NEMA Z535—2017

ANSI/NEMA Color Chart

409.3

NFPA

National Fire Protection Association

1 Batterymarch Park

Quincy, MA, 02169-7471

NFPA 70—2023

National Electrical Code

302.1, 317.4, 322.2.1, 322.4

NSF

NSF International

789 N. Dixboro Road P.O. Box 130140

Ann Arbor, MI, 48105

NSF/ANSI 14—2020

Equipment and Chemicals for Swimming Pools, Spas, Hot Tubs and Other Recreational Water Facilities

302.3, 312.4

NSF/ANSI/CAN 50—2020

Equipment and Chemicals for Swimming Pools, Spas, Hot Tubs, and Other Recreational Water Facilities

302.3, 310.2, 508.1, 612.5.4

PHTA

Pool and Hot Tub Alliance

2111 Eisenhower Avenue, Suite 500

Alexandria, VA, 22314

ANSI/PHTA/ICC 7—2020

American National Standard for Suction Entrapment Avoidance in Swimming Pools, Wading Pools, Spas, Hot Tubs, and Catch Basins

311.1

ANSI/PHTA/ICC 10—2021

American National Standard for Elevated Pools and Spas

309.1

ANSI/PHTA/ICC 15—2021

American National Standard for Residential Swimming Pool and Spa Energy Efficiency

303.3

Standards Australia

Level 10, The Exchange Centre, 20 Bridge Street

Sydney, Australia

AS 4586—2013

Slip resistance classification of new pedestrian surface materials

306.2

UL LLC

333 Pfingsten Road

Northbrook, IL, 60062

372—2007

Automatic Electrical Controls for Household and Similar Use—Part 2: Particular Requirements for Burner Ignition Systems and Components—with revisions through June 2012

506.2.1, 506.2.2

873—2007

Temperature-indicating and Regulating Equipment—with revisions through February 2015

506.2.1, 506.2.2

1004-1—12

Rotating Electrical Machines General Requirements—with revisions through November 2020

314.8

1081—2016

Swimming Pool Pumps, Filters and Chlorinators—with revisions through July 2020

314.8

1261—16

Electric Water Heaters for Pools and Tubs—with Revisions through September 2017

Table 317.2(1)

1563—2009

Electric Spas Equipment Assemblies and Associated Equipment—with revisions through September 2020

302.3, 310.1, 311.1, 314.8, Table 317.2(1), 318.2, 1001.4, 1001.7

1995—2015

Heating and Cooling Equipment—with revisions through August 2018

Table 317.2(1)

2017—2008

General-purpose Signaling Devices and Systems—with revisions through December 2016

305.4

60335-2-1000-17

Household and Similar Electrical Appliances: Particular Requirements for Electrically Powered Pool Lifts

307.1.5

UL/CSA 60335-2-40—2022

Standard for Safety for Household and Similar Electrical Appliances—Safety—Part 2-40: Particular Requirements for Electrical Heat Pumps, Air-Conditioners and Dehumidifiers

Table 317.2(1)