This document establishes that the repair cannot be confined to the damaged area. IKO requires underlayment to wrap a minimum of 6″ over hips and ridges onto the adjoining slope. A single slope on an IKO roof cannot be replaced in isolation without opening the underlayment on the slopes beside it.
System requirement IKO · Roofing · 1 page
Underlayment Laps (Overlaps) Installation Requirements
Get the document
Underlayment Laps (Overlaps) Installation Requirements
Issued by IKO. Published here complete — no summary standing in for the document, no email required.
Issued by IKO. Held in this firm’s reference library; not published elsewhere. Homeowner-identifying details, where a letter was addressed to a particular property, are blacked out — nothing else is altered, and no operative text is ever redacted.
What to do with it
A roof or a wall is an assembly, not a surface. When the manufacturer requires underlayment to lap onto the neighbouring slope, or the water barrier behind siding to be continuous and taped, the damaged area cannot be treated in isolation — and an estimate that prices it that way is describing something that cannot actually be built.
- You have the manufacturer’s document. That part is finished. Most homeowners never get this far, and it is the step a carrier cannot argue with — it is not your opinion, it is the company that made the product.
- Put it in writing, to the adjuster, with the claim number. Attach the document and ask one specific question: name the exact replacement product — manufacturer, line, colour, dimensions, exposure, nail zone, sealant design, supplier, quantity available locally — and who will answer for the repair if it fails. Vague answers are the whole game; a specific question ends it.
- Get the position on the record before anything gets installed. Once a mismatched or incompatible repair is on the building, you are arguing about something already done.
If you want the second and third steps handled by someone who does this for a living, that is what we are for — and the review costs nothing. If you would rather do it yourself, the document above is yours either way. That is the point of publishing it.
Related documents
Other IKO documents
IKO Cambridge 25
Discontinued in 2001 and dimensionally incompatible with the Cambridge sold today: the old Imperial shingle ran 39 3/16″ × 14¼″ at a 6⅛″ exposure, the current Metric one 40⅞″ × 13¾″ at 5⅞″. IKO also rejects trimming new shingles to fit.
IKO Cambridge
IKO’s Warranty Services Department confirms Cambridge changed dimensions in 2002, making pre- and post-2002 shingles incompatible on the same plane — and that the colours changed too.
IKO Cambridge vs. Dynasty
IKO’s Codes and Compliance Officer on mixing two current IKO products, never mind old and new. IKO also disclaims responsibility where a mixed repair is performed.
IKO Gentry (3-tab)
The Gentry 3-tab (36″ × 12¼″, 5⅛″ exposure) is discontinued with no replacement — IKO no longer manufactures a standard-size three-tab at all. The only three-tab it still makes, Marathon Plus AR (39⅜″ × 13¼″, 5⅝″), is expressly incompatible.
IKO Marathon Plus AR vs. Gentry 25 AR
IKO states the two three-tabs cannot be mixed, and gives the reason in performance terms rather than appearance.
IKO Cambridge · Dynasty · Armourshake · Ultra HP colours
Colourways retired effective 2022: Cambridge Aged Redwood, Dynasty Pacific Rim, Armourshake Western Redwood, H&R 12 Aged Redwood and Pacific Rim, and Ultra HP / Ultra HP IR Aged Redwood — plus low-slope base products.
Other manufacturers saying the same thing
CertainTeed asphalt shingles
The code-evaluation report treats a CertainTeed shingle roof as a complete system — compliant underlayment, the specified starter, hip-and-ridge accessories, and fasteners meeting ASTM F1667. A repair that substitutes non-conforming components does not just look different; it falls outside the report and can forfeit the Class A fire classification.
CertainTeed valleys, walls and chimneys
Open valleys are required for Custom Lok 25 and strongly recommended for Grand Manor, Carriage House, Centennial Slate, Landmark TL, Presidential Shake and Presidential TL — their thickness and multi-layer construction are not designed to bend into a valley. A closed-cut or woven valley repair on those products is contrary to the manufacturer’s own manual.
CertainTeed roof deck spacing
Deck board spacing requirements beneath a CertainTeed roof. Where the existing deck does not meet them, the fix is not confined to the shingles.
CertainTeed vinyl and polymer siding
Vinyl siding is hung, not fixed: nails are centred in elongated slots and driven loose, leaving roughly 1/16″–1/8″ of play so the panel can move with temperature. CertainTeed states that deviating from its requirements voids warranty coverage, and that failing to establish a smooth, solid substrate is itself a misapplication.
The rule this document serves
Your policy promises repair or replacement with material of like kind and quality. That is a replacement-cost and indemnity obligation, not an appearance theory — and it is why “matching” is the carrier’s word, not the policy’s. Where the installed product cannot be bought, or cannot be combined with what is still sold, the covered building cannot be restored to like kind and quality by patching it, and that is true before anyone argues about how it looks. The full doctrine, and the other 125 documents, are on the discontinued materials hub.
You have the manufacturer's document. The next part is the argument. Handing a carrier a technical bulletin and getting it honoured are two different jobs. The case review is free, and you pay nothing unless we recover.
See if my case qualifies 770-230-2616